Technical Characteristics

ELECTRICITY 220v 50Hz. ~120w.

SIZE 1300 x 2330 x 780 mm

MASS-250 Kg.

CONSTRUCTION: Looks like a cylinder. Made of 2mm thick (304 quality) Crom. Internal cylinder can be produced from transparent, acrylic matter. Parts located in the wall are dyed by electrostatical dye and is a metallic frame with control cards , pass readers and indication system.

EXPLOITATION TEMPERATURE - 5, + 45 C

CONTROL can be controlled by a simple contact, TTL , CMOS or any voltage between 5-48 V.  Supports access devices of any kind and coin systems.

SYSTEM controlled by microcontrollers.Two directions. Internal body is closed for both directions in initial position. After person allowed to pass rotates in that direction to open itself. After entrance rotates in opposite direction to open exit door. After it becomes free returns to its initial position. If pass is allowed and no one enters the cylinder, it returns to its initial position. Applies the same procedure, if someone enters and quits. If the person allowed to pass hasnt completely entered the cylinder, then warns the person by beeper. 

SIGNS Pass structure can be determined according to signs located on both sides.( Red line: closed , Green arrow: pass allowed.)

EXTRA (ops) weight sensor, installed on floor and weights passing persons, will let only determined weights to pass. 

ALARM MODE Warns disallowed persons by lights and beeper. .

S. O. S. mode During this mode arms are left free.  This mode can be achieved by a simple contact or PC.

WARRANTY 1 year against production mistakes.