Technical Properties
ENERGY 220 V., 50Hz. , ~ 60W.
ARMS 3 arms 40 mm.in diameter, acrylic
SIZE 300 x 550 x 980 mm.
MASS - 30 Kg.
BODY Acrylic polyester and gunk. Colored with smooth and acrylic wet dye. Color can be any metallic or opaque color. Device was made of non-metal matters.
EXPLOITATION TEMPERATURE (-5),- (+45) C. for internal medium.
CONTROL Turnstile : simple contact or TTL, CMOS, any voltage between 5 - 48V. Is suitable for use with any access control and coin system. System has a unique ID code, which make it possible to communicate via RS485 port with multiple systems or PC Sistem . Has unique ID code, which gives the opportunity to communicate with multiple systems or to be controlled by PC via R485 port.

SYSTEM is controlled by microcontrollers. Two directions. After pass signal arm should be slowly pushed. Outputs pass direction via output relays or in data form. A.T.C. (Anti Tightten Controller) . Pass counter output. Has internal counter for PCs. Is made of non metals, because of it proximity and other RF reader could be hidden in it. A LCD display can be put on it.
SIGNS has Animational display. For pass shows animational green arrows. In "disable mode" shows red "X".
S.O.S. mode During this mode arms are left free. This mode can be achieved by simple contact or PC.
PASS During pass a torque with a maximum of 600 gr is applied.
EXTRA (ops) Manual control, Remote control.
INSTALLATION is made by 4 4 bolts onto the floor.
WARRANTY 1 year against production mistakes.